SPT RF-320B, Instruction Manual

Page: 3 / 10

Correct Positioning
For purpose of safety, reliance, low power consumption and
durability of your fridge, please pay close attention to the
followings.
Well Ventilation
Good ventilation is needed around the fridge
for easy dissipation of heat, higher efficiency
of refrigeration and low power consumption.
For this purpose, sufficient clear space should
be kept around the unit. The back should
have at least 100mm of space from the wall,
the sides with 200mm and the top with
300mm. Room should be left to allow the
door to open to 160

.
Power Line Cord
Do not lengthen or fold the cord into coil
during operation. More importantly, keep cord
away from the compressor during operation.
The heat from the compressor may deactivate
the insulation or cause leakage of electricity.
Power Supply
The fridge is only applied with single-phase
power supply with alternating current of 115V,
60Hz. If fluctuation of voltage exceeds the
above, for safety sake, apply A.C. automatic
voltage regulator of more than 350W. The unit
must employ a special power socket instead of
the common one with other appliances.
THE PLUG MUST MATCH THE SOCKED
WITH GROUND WIRE.