7
CLEANING & MAINTENANCE
Please thoroughly clean your ice maker before initial use.
EXTERIOR:
the outside of the ice maker should be cleaned regularly with a mild detergent
solution and warm water. Always use a soft cloth to avoid scratching or damaging the housing.
INTERIOR:
please use the following Self-Clean function:
1. Take out the ice basket
2. Add water and vinegar or lemon juice mix (1:1 ratio)
3. Plug in unit, press and hold the CLEAN button for approximately 6-7 seconds, then release.
The unit will automatically enter Self-Clean program. This process takes about 5 ~6 minutes.
When the Self-Clean program is finished, unit will automatically power down.
4. During this process, the following symbols will display in the LCD window:
The fan blade will be rotating. This process rinses the inside parts several times.
5. After the Self-Clean program is completed, unplug unit and drain out the water by unplugging
the drain cap on the side. Replace drain cap.
6. Add fresh water to the water reservoir, up to the water level mark.
7. Plug in the unit and repeat the Self-Clean process by repeating steps 3 to 5. This will rinse
out the vinegar/lemon residue.
8. After draining the water, replace and tighten drain cap.
9. Dry the interior and exterior with a clean, soft cloth.
NOTE:
It is strongly recommended to clean the unit before initial use or after the unit has not
been in use for a long period of time.
