7
c) Pull out a section from the paper roll, close the paper cover, and pay attention to the paper
head centered.
Note: Adjust the limit knob to a position slightly smaller than the existing paper width to facilitate
subsequent paper roll installation.
1.Pay attention to the direction of loading paper,make the printing surface face to the
print head.
2.Please don’t feed or draw the paper forwards or backwards with hands.
3.Keep clean of the print head, avoid to influence the printing quality.
Figure 3.1.1 installation diagram of paper roll
3.2 Basic Function Usage
3.2.1 Power On / Off
Power On:In the status of power off, [paper cover] is closed, and then press the power switch
"-" on the back of the printer to turn on the power. The error indicator and the power indicator
flash alternately for two times, and then the error indicator goes off, and the printer enters the
normal working mode.
Power off: In the status of power on, press the power switch "o" on the back of the printer to
turn off the printer power.
！
Attention
!