9
slave device. The initial name of the printer is E5 BT Printer, the initial password is
‘1234’; users can change the printer name and password by using<SP-E5 Setting
Tools> software. Please see the details in help file of <SP-RME5 Setting Tools>.
Before working, SP-RME5 Printer needs to be paired with primary device.
Pairing begins from the host device. Usual pairing course is as below:
1. Power on printer;
2. Host device searches for the outer Bluetooth device;
3. If there are other Bluetooth devices, please select E5 BT Printer;
4. Enter the password ‘1234’;
5. Pairing finished.
Please see details in primary device Bluetooth function instruction for
reference.
Illustration:
The Bluetooth of SP-E5 divided into dual mode Bluetooth, one-to-many
Bluetooth and IOS Bluetooth. Dual mode Bluetooth supports Android device and
one IOS 4.0 device, and only one device can connect with the printer at the same
time. One-to-many Bluetooth supports seven Android devices and one IOS device
connect printer simultaneously. IOS Bluetooth supports IOS 2.0 device.
Notice:
1. When pairing, please make SP-E5 printer switch on.
2. Once the Bluetooth of SP-E5 paired with the host Bluetooth device
successfully, it can’t be paired with other Bluetooth device until it unconnected with
the host device.
2.4.6 Cash Drawer Interface
The cash drawer interface of RME5 printer is RJ-11, 6 pin socket as below:
The pin assignment of the cash drawer interface is as follows:
Pin No.
Signal
Direction
1
Chassis Ground
——
2
Cash drawer driver
Out
