SPRT SP-RMD11A, User Manual

Page: 36 / 59

34
Explanation:
The using explanation is same as the command for Printing Curve I.
FS P Print Pre-saved Bitmap
[Format] ASCII: FS P n
Decimal: 28 80 n
Hex: 1C 50 n
Explanation:
0≤ n ≤2, this command is used to print the monochrome bitmap which is pre-saved in the
Flash memory of printer. The bitmap in Flash memory can be created and wrote into
printer through Setting Tool in PC. The largest width of bitmap is 384dots and the largest
height is 1365dots. (The bitmap can’t be over 64km.) “n” is the number of bitmap.
Remark: If the number of bitmap isn’t defined, this command is invalid.
The bitmap must be monochrome.
This command won’t be affected by printing mode (underline, character size or
reverse white printing).
If the width of printed bitmap is beyond one line, the beyond part won’t be
printed out.
It needs the special setting tool to download the bitmap. Pls ref. (RMDIIID
Setting Tool). The downloaded bitmap through this method won’t be low, unless
it is covered by other bitmap.
ESC t Choose Codepage
Format: ASCII: ESC t n
Decimal: 27 116 n
Hexadecimal: 1B 74 n
Explanation:
0 ≤ n ≤ 45, when n is 0xFE, cancel choosing codepage. The character will be printed out
according to Codepage Table in Appendix 2. Default n=0xFE, which means no
codepage is choosed.
Choose codepage on n page from the following Codepage Table. The value of n is in
decimal format.
n
代码页
Code Page
0 CP437 [
美国，欧洲标准
] CP437 [U.S.A., Standard Europe]
1 KataKana [
片假名
] Katakana
2 PC850 [
多语言
] PC850 [Multilingual]
3 PC860 [
葡萄牙
] PC860 [interfaceuguese]
4 PC863 [
加拿大
-
法语
] PC863 [Canadian-French]
5 PC865 [
北欧
] PC865 [Nordic]
6 WCP1251 [
斯拉夫语
] WCP1251 [Cyrillic]
7 CP866
斯拉夫
2 CP866 Cyrilliec #2
8 MIK[
斯拉夫
/
保加利亚
] MIK[Cyrillic /Bulgarian]