8
2.4 Buzzer, Buttons and Indicators
There is one button and one inner buzzers and three indicators on SP-POS894
printer.
【
FEED
】
is paper feeding button, the function of its enabling or disabling the button
on/off can be set by print command, when the button is enabled, press
【
FEED
】
button, then the paper presenting driver starts up and paper fed into the printer;
release
【
FEED
】
button, paper feeding stops.
The buzzer indicates the error status type, which can be set to enabling error alarm
or disabling by parameter setting. Error status type is the same as error indicator.
The green POWER indicator light is the power indicator, and the POWER indicator
light is on to indicate that the printer has been turned on.
The red PAPER indicator is the paper status indicator, and when the indicator is on,
the printer is out of paper.
The red ERROR indicator light is an error status indicator, and the indicator light is
always on to indicate an error status, such as opening the cover. For details, refer to
"Error Indication Table"
ERROR is a red/blue dual-color indicator light, used to remind error status/incoming
order detection. When the printer is working normally, the red ERROR indicator light
is off. The indicator light flashes as an abnormal alarm state. When the indicator light
stays on, it means not printing The paper compartment cover was opened during the
process. The blue indicator light flashes to indicate an order reminder.
The order reminder indicator flashes, and the buzzer sounds 3 times: reminding the
order.
The error indicator flashes and the buzzer sounds: it means that the printer has an
error.
According to different flashing methods, indicate the type of printer error:
