9
The battery will run out after a period of usage. When it nearly runs
out, printer will give a alarm through the battery indicator flashing on
LCD, at this time, user needs to charge up the battery
The charging method is as following: connecting the adapter to the
power socket with 220V, 50HZ, then plug the power charging plug to
the power socket of the printer, so the power charging begins. During
the course of power charging, the charging indicator
【
CHARGE
】
goes red, and
【
CHARGE
】
turns to green when the charging is full.
Please don’t use printer when it’s charging.
3.2.8 Set Into Upgrading Mode
In the status of power off, press the
【
MODE
】
button and
【
FEED
】
button, then press the Power button, hear ‘one low one high ’prompt
tone, loose all the button immediately, then the printer enters
upgrading mode, the LCD shows upgrading mode.
Please note that only USB interface can support online procedure
upgrading.
3.3 Printer Parameters Setting
Users can set more parameters by using the specified
〈
SP-L52
Setting Tools
〉
software through computer. The setting includes:
language
、
font
、
printing density
、
default code page
、
Bluetooth device
name and password, printing mode etc. About the setting method
please refer to the <SP-L32 Setting Tools Software Help>, offered
with the software together.
3.4 Printer Interface Connection and Printing
3.4.1 Serial Connection
The optional part of SP-L52 has one cable with 9femal pin/Mini USB
8P (the end with MINI USB 8P connects with the printer.)
The printer is Uart asynchronous serial communication. It’s RS232.
The baudrates can 1200bps
、
2400bps
、
4800bps
、
9600bps
、
19200bps
、
38400bps
、
57600bps
、
115200bps. Pls refer to 3.3 about
