12
2, Via SEL and LF Combination set
SP–D10 series mini printer has two buttons, feed button
【
LF
】
is in front panel, Setting
button
【
SET
】
is in PCB which is on the behind.
SP–D10 series mini printer only have one green online indicator light. Indicator lights
up means the printer is on-line, otherwise it means off-line or busy.
Enter the parameter setting model
: press
【
SET
】
button and turn on the power,
the printer enter into the state of setting, meanwhile print out the notice message. Use the
【
SET
】
button to choose the setting items, the setting items will change to the next by
pressing the
【
SET
】
every time, and print out the current setting value. Use
【
LF
】
button
to choose the value you want for the setting items, and the value will change to the next
after press the
【
LF
】
button.
Exit the parameter Setting model
:
press the
【
LF
】
button, then press
【
SEL
】
button, release
【
LF
】
button and
【
SEL
】
button,the printer will print out “Exit Set Mode”
notice message. Now the set parameters have saved and exit the setting mode enter into
normal working state. If you turn off the power of the printer, the setting parameters will
not saved.
Head setting (connect through Parallel interface, there is no baud rate and Serial
interface format setting items) :
2.1, Baud Rate:
