42
To make minor height adjustments you can remove or add the spacers
provided on the pin section of the hinge.
You can also adjust the squareness of the doors by loosening the
diagonal braces, then holding pressure in the direction you may want
to adjust the door and then tighten the braces.
3
The latch shown in image 3 joins the two sections of the doors together.
J02R/L
J02R/L
J01
1
J01
1
J02R/L
J02R/L
3
2
2
1
J01
T08
J08
Z02
Drill one hole on both L01A approx
500mm up from the bottom, Dia. 2.5mm,
then tighten J08 with Z02, and push T08
into the channel of J08 (see Fig. right).
2
J02R/L
Z02
T08
T08
J07
Once the L09 is in place.
A small bead of silicon suitable
for polycarbonate can assist in
preventing leaks.
To avoid leaking, using
silicone on J02R / L,
T08 and J07 is an
option (see Fig. below).
L09
L09
Summary of Contents for GRANGE - 5
