S-Nano User Guide
27
Version 1.0 Oct 2012
© Copyright 2012 SPROG DCC
The “Add Message” field can be used to add annotations to the command
history.
Send Command
The “Send Command” field provides the same functionality as the basic Send
command utility available on the SPROG menu. Enter a command in the
Command field and press return on the keyboard or click the send button to
send the command to the S-Nano.
Selecting SPROG Operating Modes
After changing any of the following modes, you should use the “Save” button
to store the changes in the S-Nano.
Speed Step Modes
Not applicable for S-Nano.
Current Limit
Not applicable for S-Nano.
Set ZTC Mode
Not applicable for S-Nano.
Set Blueline Mode
Not applicable for S-Nano.
Unlock Firmware
Select this option if you are about to update the S-Nano firmware using the
bootloader. This mode is automatically canceled when the power is removed
from the S-Nano.
Save
Always click this button after selecting a new mode. The selected modes
(apart from “Unlock Firmware”) will be stored in the S-Nano, so that they are
effective each time you use your it, even after the power has been removed.
!