EN
Quick reference guide
1
Fill the fresh water tank with
water and add the correct
dosage detergent/cleaning
agent.
2
Install brush or pad holder.
3
Use lever to lower the suction
bar.
4
Stepless adjustable water
amount for any type of floor
covering
5
The electrical version
Camira K requires an
optional extension cord.
6
Press this button to start
the Camira. Then, press the
button “Smart Run”. The Ca-
mira is now ready for use.
7
Press and hold either one of
the levers on the operation unit
to start the Camira and to start
working. Once the levers are
released, the machine and all
three functions are turned off
automatically.
(Functions = brush drive,
suction engine, water supply)
8
When the cleaning task is
concluded, the waste water
can easily be released with
the draining hose.
9
Clean the waste water tank
after and carefully rinse the
float.
10
Set the cover of the waste
water tank aside and let the
tank and cover dry.
11
Open the valve of the fresh
water tank at the bottom of
the machine and drain the
water completely.
12
Use the lever and raise the
suction bar.
13 +14
Press the button Smart Run
to turn off the individual
functions.
The Camira has an automatic
brush-release-function.
Tilt the machine backwards.
Press and hold the button
of the water supply. While
holding it, use the lever on the
operating unit.
15
Turn the Camira off by pres-
sing the following button
