Sprinte ASP 116 evolution, Installation And Maintenance Manual

Page: 45 / 56

ASP 116 EVOLUTION
– INSTALLATION MANUAL
All rights reserved, including translations.
45
3. Re-leveling test
This test has to be done once a year and recorded in the maintenance log .
This test helps you to check :
•
The movement of the car with the doors opened.
•
The opening of the safety chain, when the car exits the door unlocking area.
With the EvoPad application, you can easily perform this test inside the car.
Test conditions : Lift available at the floor.
Go into the assistance menu :
+
…
Choose «YES» to run the re-leveling test.
If the all conditons in are not fulfilled :
Otherwise
The doors are opening :
As indicated , by keeping or pressed , the car will move up or down
with the doors opened.
When you release the button, the car will start automatically the re-leveling operation.
If you don’t release the button, the car will stop automatically as soon as it will leave the door
unlocking zone
.The “SAFE.REL.CUTOFF3 fault is recorded.
On the screen a letter gives you the position of the car:
U
: the car is under level
A
: the car is at the level
O
: the car is over the level
At all times , press to stop the test.
to confirm
…
Your lift is back in use.
EXIT TEST ?
YES(+) NO (-)
STEP 1
STEP 2
Choose
ASSISTANCE
STEP 3
STEP 4
RELEVELLING TEST
NO
RELEVELLING TEST
YES
STEP 1
LA CABINE N’EST
PAS DISPONIBLE
MA OR -
TO TEST LEVEL.
MA OR -
TO TEST LEVEL.
U
MA OR -
TO TEST LEVEL.
A
MA OR -
TO TEST LEVEL.
O
RELEVELLING TEST
NO
IN USE A X
AVAILABLE
ENTER

-

-

- 
+
BACK
BACK
BACK

+