32
cord from the wall socket. Wipe the housing with a damp cloth and mild
detergent.
• Try to carefully but completely remove any hot plate contamination before each
use.
• Ensure that the power cable, appliance plug, and motor do not come into
contact with water during cleaning.
• In case of heavy soiling and after removing the wooden handles, only the milk
container, lids, and stirring inserts may be washed in the dishwasher. It is
recommended to gently clean the wooden elements by hand.
• If necessary, the handles on the lid and container can be unscrewed without
additional tools.
• Carefully dry all items after cleaning.
1.
Remove the used stirring insert and rinse carefully under warm water.
2.
Fill the milk container with hot water and some detergent after use. For heavy
soiling and burnt milk residue, soak the filled container for 5-10 minutes, then
wipe with a sponge.
3.
The base station must not be cleaned under running water. Use only a damp
cloth to remove dirt.
Water
Water
Water
1.
2.
3.
Water
4.
5.
Please observe the following steps to remedy any appliance malfunction:
Problem
Solution
The operating button has been
pressed, but the signal light stays off
and the appliance does not start.
Check power cable and appliance plug.
Are they correctly connected to the
socket or are they damaged?
Check the general power supply to the
socket.
The overheating protection is possibly
blocking the start.
Did you allow the appliance to cool
down sufficiently after the previous
use and did you observe the
prescribed capacities?
The appliance is switched on and runs,
but no milk froth is produced.
Check if a stirring insert is inserted
into the milk container.
Make sure you are using the correct
stirring insert. To produce froth, the
ribbed insert must be placed into the
container.
Make sure that the stirring insert is
centred and fits snugly on the mag-
net holder at the bottom of the milk
container.
