ALARM SETTING
Press the “M” button to switch to the AL (alarm) screen
Press and hold the “S” button for 3 seconds. The hour digits flash.
Press the “▲” or “▼” button to change the hour
Press the “S” button to select the displayed hour. The minute digits flash.
Press the “▲” or “▼” button to change the minutes
Press the “S” button to select the displayed minutes
Press the “S” button to turn on or off the alarm. A bell icon (
) in the upper left corner of the screen indicates
the alarm is on.
Press the “▲” button to select a beeping alarm sound. Press the “▼” button to select a musical alarm sound.
Press the “S” button to silence the alarm when it sounds
TIMER SETTING
Press the “M” button to switch to the TIMER screen
Press and hold the “S” button for 3 seconds. The minute digits flash.
Press the “▲” or “▼” button to change the minutes
Press the “S” button to select the displayed minutes. The second digits flash.
Press the “▲” or “▼” button to change the seconds
Press the “S” button to select the displayed seconds
Press the “S” button to start the timer countdown
The alarm will sound for 60 seconds when time is up. Press the “S” button to stop the alarm. The timer will
recall the last set time. Press the “▼” button to reset the timer to zero.
The timer will time up to 180 minutes, 59 seconds
TEMPERATURE DISPLAY
Press the “M” button to switch to the TEMPERATURE screen
Press the “S” button to switch between
°
F and
°
C temperature scales
RETURN TO TIME SWITCH
The unit can be set to show a selected screen continuously (ex. temperature), or it can automatically
return to the convenient clock screen.
Set to OFF to hold the current screen until another screen is selected
Set to ON to automatically return to the clock screen after 10 seconds of viewing another screen
NOTE: if set to ON during programming, and no buttons are pressed within 10 seconds, the unit will return to
the clock screen. Simply repeat programming steps, or move the switch to OFF during programming.
BACKLIGHT SWITCH
For a continuous color changing display, move the Backlight switch to ON
For a 10 second backlight, move the Backlight switch to TR. When a screen changes, the backlight will turn on
and then off automatically.
To keep the backlight off, move the Backlight switch to OFF
TIPS AND PRECAUTIONS
Set the backlight switch to OFF or TR to conserve battery power.
Continuous use of the color changing LED feature could cause the temperature reading to be higher than the
actual air temperature. For best results, turn off the continuous color changing feature when product is not in
use.
Should the display or sounds become dim or irregular, replace all the batteries at the same time. Do not mix old
and new batteries. Do not mix Alkaline, carbon-zinc (standard) or Nickel-Cadmium (rechargeable) batteries.
To reset all the settings, gently push a small tool into the RESET hole on the bottom of the unit.
