background image

 
 

ONE (1) YEAR LIMITED WARRANTY 

This product is warranted against defects in materials or workmanship (excluding batteries) for one (1) year 
from date of original purchase for the original purchaser. It does not cover damages or wear resulting from 
accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Should this product require 
service (or replacement at our option) while under warranty, do not return to retailer. Please pack the item 
carefully and return it prepaid, along with store receipt showing date of purchase and a note explaining reason 
for return to: 

 

Taylor Precision Products, Inc. / Springfield Precision  

2220 Entrada Del Sol, Suite A 

Las Cruces, New Mexico 88001 

1-866-843-3905 

www.springfieldprecision.com 

 

There are no express warranties except as listed above. This warranty gives you specific legal rights, and you 
may have other rights which vary from state to state.  
 
For additional product information, or warranty information outside the USA, please contact us through 
www.taylorusa.com or www.springfieldprecision.com. 

 

© 2013 Taylor Precision Products, Inc. and its affiliated companies, all rights reserved. Springfield® is a 
registered trademark of Taylor Precision Products, Inc and its affiliated companies, all rights reserved.   

 

 

Made to our exact specifications in China.

 

 

 

 

                                                                                                                                                                           
 
                                                                                                                                                                           
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

     91756 7.13 

 

 

 
 

 

 

 

 

 

 

Summary of Contents for 91756








Reviews: