Disclaimers – Legal notices
CE (all versions)
This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, SPRINGCARD declares that this product is
in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please consult
www.springcard.com.
FCC (SC16217 version only)
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antennae
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with
any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority
to operate the equipment.
OEM integration (SC16234 version only)
This product is an OEM device, with possibility to be significantly altered by user through hardware enhancement/modifications and/or
configuration changes, even at run-time. Thus, it is up to the manufacturer of the final equipment in which this device will be used to
ensure compliance with regulations and standards (including CE and FCC marks) after having mounted and configured the device as it will
be delivered to the end-user.
This product should be handled like a CMOS semiconductor device. The user must take all precautions to avoid build-up of static electricity
while working with this device. The connectors and/or device pins should not be touched with bare hands.
Safety information
Please ensure that the product is properly used by observing the warnings and cautions below to prevent any risk and/or damage to
property.
- Keep the product free of dust. It may damage mechanical and electronic parts of the product.
- Keep the product dry and away from water. It may damage the product.
- Do not use or store the product in high temperatures as this may reduce the life span of electronic devices and/or melt plastic parts of the
product.
- Do not use or store the product in cold temperatures. Abrupt changes in temperatures may cause condensation and damage electronic
circuits. Do not clean the product with cleaning solvents, toxic chemicals, or strong detergents as this may damage the product.
- Do not paint the product. Paint may interfere with the normal operation of the product.
- Do not drop or otherwise shock the product. It may damage the product or its internal electronic circuits.
- Do not cause impact to the product or touch it with sharp tools as this may damage the product.
- Do not disassemble, repair or modify the product as this may damage the product and invalidate the product warranty.
- Do not use the product near a microwave oven or a wireless communication device as this may cause malfunction or interference with
the product.
- In any place where wireless communication is prohibited, such as hospitals or airplanes, turn off the power and refrain from using the
product. In a place where wireless communication is prohibited, electromagnetic waves may cause hazards or accidents.
SpringCard PMU18264-AA 2018/09
