2
3
Function
Spring USA’s Induction Dot is a round induction range intended for
product holding. The range has been designed specifically to keep food
warm. Food must be at or above serving temperature before being
placed on the range.
Model #
Voltage
Phase
Hertz
Watts
Amps
Plug
SM-360R
110-120
1
60
360
3.0
NEMA 5-15P
Electrical Requirements:
NOTICE:
The induction range only maintains temperature
–
it
does not cook or continue to cook food.
Installation
Inspect all parts of the induction range prior to installation and use. If
the unit is damaged, do not use. Contact a supplier for a replacement.
Ensure dedicated power is available at the installed location.
The induction range must be placed in a stand or surface mounted (by
others) in a heat resistant countertop (2” thick maximum) or base
cabinet with the control panel mounted on the front of that enclosure.
Daisy Chaining:
The Induction Dot has a built-in receptacle located in the back of the
unit that allows for daisy chaining. The maximum number of Induction
Dot units allowed for daisy chaining into one 15-amp/120-volt circuit is
4 units.
Before You Begin
To ensure safe operation, read the following instructions in their
entirety.
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTICE
Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
•
Plug only into grounded electrical outlets matching the nameplate
rated voltage.
•
Do not power the equipment with extension cords, power strips, or
multipurpose sockets.
•
Equipment should only be used in a flat, level position.
•
Do not obstruct or cover the equipment in any way when in use.
•
Do not operate unattended.
•
Do not leave an empty vessel on the equipment when in use.
•
Closely supervise equipment operating in public areas and/or around
children.
•
Do not operate if equipment has been damaged or is malfunctioning
in any way.
•
Keep equipment and power cord away from open flames, electric
burners or excessive heat.
•
Unplug equipment and let it cool before cleaning.
•
Unplug when not in use.
ENGLISH
