Safety Precautions:
Plug the power cord into a dedicated circuit.
Note:
Nothing else should be
plugged into this circuit. Each MAX Induction® Range must have its own,
sufficient power supply as outlined below. Once you have plugged the unit
in, it will beep, and an ‘EO’ code will appear in the display window.
To Begin:
Turn the unit on. An ‘EO’ code will appear next in the digital window,
indicating the induction range is searching for cookware.
Turn the knob clockwise to turn the unit on. Your MAX Induction® range
will always start out in the “Cook” mode. “Cook” is the default mode.
Place suitable cookware within the circle on top of the MAX Induction®
Range.
Select either the “Cook” Mode or the “Temp” Mode.
In “Cook” mode, turn the dial clockwise. The LED will display cook
power levels of 1 thru 20.
In “Temp” mode, turn the dial clockwise. The LED will display
temperature levels from 110° to 400° fahrenheit.
Turn the knob clockwise to set the power level or temperature.
To shut the induction range off, turn the knob counter clockwise until you
hear the unit ‘click’ and turn off.
Actual range temperatures may vary due to a number of variables, such as
ambient temperature in the immediate surrounding area, content and volume
of food being heated or cooked, and whether or not you are using a lid on
the serving vessel.
-----------------
Never attempt to service any part of your MAX Induction® Range on your
own. Contact our Service Department by calling (1) 630-527-8600.
Attempting to service your Induction Range on your own, or through an
unauthorized repair facility automatically voids your warranty. For service
forms, visit the Spring USA website.
For Limited Warranty Information, visit
www.springusa.com
Note:
This equipment uses, generates and can radiate radio frequency energy. If
not installed correctly and used in accordance with the instructions, may
cause harmful interference to radio communications. Users or guests with
Pacemakers should contact their health care professional prior to using this
product.
NEMA 6-20P
6’ Cord
3500 Watts ~ 60 Hz
208-220 Volts / 15 Amps
SM-351C
CEE 7/7 16A
1.8 m Cord
3000 Watts ~ 50 Hz
220-240 Volts / 16 Amps
SM-353C
Plug Type
Peak Power
Voltage / Amps
Model #
Specifications:
Induction Range Error Codes:
www.springusa.com
(1) 630-527-8600
Review your dedicated power
requirements. Each range must
operate with the power required on
Page 4.
Range will not turn on. Range is
experiencing temporary voltage
overload or is not on its own,
dedicated circuit.
E3
Remove the cookware from the
range and let the range cool. Make
sure the vents are clear. Verify you
are using induction-ready
cookware. Once the range has
cooled, restart.
The range has overheated.
E2
Clear vents, let range cool down,
then restart. If error message
continues, your range needs to be
serviced.
Range has overheated due to
blocked ventilation and has shut
down the range.
E1
Place an induction ready pan on
the range.
Induction range does not sense
induction-ready cookware has
been placed on the glass surface
E0
Solution
Cause
Error
4
5
All International Ranges ship with a CEE 7/7 16A plug. International
plugs must be changed to match the national standard, based on country
requirement.
