background image

 

14 

 

DYNAFLOW MAINTENANCE SCHEDULE 

DAILY: 

1.

 

At the end of the cooking day wipe off the interior and exterior of the Dynaflow hood canopy and the underside of the 
grease trough with a damp cloth.  Inspect the grease filters and clean if necessary.   

2.

 

Clean SA Spark Arrestor filter daily. 

3.

 

Inspect and clean HE High Efficiency filters daily as required. 

WEEKLY: 

1.

 

Remove all the grease filters and wash in a mild detergent and water mixture. 

GREASE TROUGH

WIPE UNDERSIDE OF

AFTER DAILY COOKING

WIPE INTERIOR OF CANOPY

 

Cleaning the Hood Exterior 

Figure 23 

 

Wipe off the interior of the filter hood plenum behind the grease filters and the interior and exterior of the grease trough.   
Remove the grease cup and clean if necessary. 

SIX MONTHS 

1.

 

Check the exhaust fan belts for alignment, tightness, and wear.  Adjust and/or replace. 

2.

 

If the hood has an exhaust duct collar fire damper (Models “FD”) inspect the exhaust fusible link fire damper.  Clean 
and/or replace the fusible link if necessary. 

 

ONE YEAR 

1.

 

Check the exhaust fan belts for alignment, tightness, and wear.  Adjust and/or replace. 

2.

 

If the hood has an exhaust duct collar fire damper (Models “FD”) inspect the exhaust fusible link fire damper.  Clean 
and/or replace the fusible link if necessary. 

3.

 

MB Dynaflow hoods replaced the supply duct collar fusible link. 

4.

 

MJ Dynaflow hoods replace the MJ plenum fusible link under the MJ Blower assembly. 

5.

 

MJ Dynaflow hoods measure the MJ Grill discharge and adjust MJ Blower assembly rheostat to set correct appliance 
velocity at the discharge. 

 
 

Summary of Contents for Dynaflow





























Reviews: