OPERATING MANUAL
MN-SST77B
ED-18-01
SPRIANO® TECHNOLOGIES
- www.spriano.it – [email protected]
a TERRANOVA® Srl brand
- www.terranova-instruments.com - VAT IT07848810151
Factory & Sales: Via Gramsci 1 – 26827 Terranova dei Passerini (LO) – Italy
Head Office: Via Rosso Medardo 16 – 20159 Milano – Italy Ph: +39 0377 919119 – Fax: +39 0377 855720
Pa
g.
8
/3
2
3.3
M
ECHANICAL
I
NSTALLATION
The Transmitter should be located, if possible, at some easily accessible, well lighted place on
the vessel or pipe, in order to allow putting in operations and maintenance work. Location
should also be such that ambient temperature at the Transmitter enclosure be not excessive
(see MARKING).
I
NFORMATION
!
-
Plant overpressure / over-temperature: observe rating plate
-
Installation on seismic areas: inform technical department
-
In case of unstable fluids: inform technical department
-
In case of damages: inform technical department
-
Inspection frequency: consideration should be given to applicable national
legislation.
W
ARNING
!
-
The process connection must be realized in such a way that guarantees the hold
at the maximum working pressure and temperature.
-
Do not overcome the maximum pressure and temperatures indicated in the
technical data sheet of the selected model.
-
When the device is connected to the process it can be submitted to high
pressures and temperatures. To avoid accidents subsequent to sudden discharge
of pressure and/or to contact with dangerous or flammable fluids it is necessary
to take the maximum attention when the Transmitter is taken off, heated or
repaired, verifying that it is isolated from the process and is not submitted to
pressure and/or temperature.
