2 – GENERAL INSTRUCTIONS
1.
Strictly adhere to all safety and accident prevention rules, regulations and OSH guidelines in addition
to the instructions contained in this manual.
2.
The warnings placed on the machine show safety measures to be taken to prevent accidents.
3.
When travelling on public roads strictly follow the traffic rules.
4.
Prior to starting work the operator must become familiar with the controls and operating devices on
the machine and their respective functions.
5.
Wear appropriate clothing. Loose clothing can become entangled in moving parts.
6.
It is advisable to operate on tractors provided with a cabin and with a safety frame according to the
local regulations.
7.
Prior to commencing operations check for people or livestock in the vicinity of the machine. Only
operate the equipment if you have good visibility. Move any animal or person away from the
dangerous area of the machine (spreading area).
8.
Do not carry animals or allow other persons to ride on the machine during operation.
9.
The connection of the machine to the tractor must be made to all the available engagement points.
10. Take caution attaching or removing the machine onto/from the tractor.
11. Prior connecting the machine, be sure that the ballasting of the front axle of the tractor is suitable.
The ballasting must be attached to the proper approved brackets in accordance to the tractor
manufacturer’s specifications.
12. Be sure that the tractor front axle loading does not exceed permitted limits.
13. When travelling on the public roads ensure to comply with all rules concerning clearances,
overhangs and maximum dimensions.
14. Prior to travelling on a public road ensure that all guards and signalling devices (lights, reflectors,
etc.) required are fitted.
15. All remote control devices (cables, ropes, rods, flexible lines, etc.) must be positioned in such a way
as to prevent to movements which could lead to accidents or damages.
16. Do not leave the operating seat while the tractor is still moving.
17. The speed and the way of driving must be appropriate to the nature of the ground. In all cases do
not perform sudden direction changes.
18. The steering uniformity, tractor adhesion, road holding and the efficiency of the braking devices are
influenced by the following factors: weight and nature of the connected machine, ballasting of the
front axle and the state of the ground or paving. It is important then, to follow exercise caution
appropriate to each situation.
19. Take care when steering taking into consideration the trim, length, height and weight of the machine.
20. Prior using the machine check that all the guard devices are applied and be in good state. Damaged
guards must be immediately replaced.
21. Prior beginning the job check the tightness of nuts and screws, particularly those which are securing
the implements (discs, firms, deflectors, etc.). Tighten them if necessary.
22. Do not enter the operating area of the machine (spreading area).
23.
Caution!
Check for cracks and shearing which may occur on the remote control devices,
particularly those hydraulically controlled.
24. Switch off the engine prior to leaving the tractor seat or working on the machine, removing the key
and waiting until all the moving parts have stopped.
