12
TJM60AG
T
ank
Cleaner
ǀ
08/07/2017
Replacing Gear Box Seals
Replace worn seals in gear box
1 . Adjustable Crescent Wrench
2 . Screw Driver
Step 1 .
First disconnect high pressure hose from round inlet
body .
Step 2 .
Remove 4 #10-32 socket head screws from gear box
body using an Allen wrench.
Step 3 .
Next, pull nozzle extension tube sub assembly off of gear
box body .
Step 4 .
Fist remove cap and nozzle hub from nozzle body .
Then remove nozzle head assembly from extension
tube assembly using an adjustable crescent wrench to
turn nozzle head and insert a suitable size Allen wrench
through hole in gear shaft inside round inlet body.
Round Inlet
Body
Gear Box
Body
Remove 4 #10-32 socket
head screws from gear box
body using an Allen wrench
Pull nozzle extension tube
sub assembly off of gear
box body
Next, use adjustable
crescent wrench to
remove nozzle body
Insert suitable size Allen
wrench through hole in
gear shaft to allow for
removing nozzle head
First remove cap
and nozzle hub
from nozzle body .
High
Pressure
Hose
