Installing the Handset Lifter
You will be placing the Headset Lifter on your
phone so that the Ring Tone Sensor in the Headset
Lifter is positioned over the speaker of your phone.
Please refer to Figure A on the next page. The
exact position of the lifter will vary phone to phone.
You will have to experiment to find the best place
on your phone to physically lift the phone’s handset
in order to take the call on your Headset. You can
adjust the height of the lifter arm by moving the
up/down lever to the best height. The lever can
be adjusted in three (3) steps, from low to high, to
lift the handset, based on the shape and weight
of the handset. You can test the lifter’s position
by pressing the talk button on your Headset: you
should be able to hear a dial tone if the handset is
raised to the correct height.
Once you have found the best location, you’ll have
to attach the lifter to your phone with the provided
adhesive strips.
If the Handset Lifter is not directly over the
speaker of your phone you may have to plug in
the optionalextra microphone, provided. If it is
needed, plug it into the jack on the lifter and place
6
