Proceed to Slide the Handle (39) onto the dragonfly frame, attached to the Backrest
Tube (7), and secure the Handles (39) with Bolts (40).
Once the Handles (39) have been secured with the Bolts (40), proceed to install the
Grip Covers (27) on top of the Handles (39).
Lastly, install the Plastic End Caps (28) on each corresponding side of the Handles
(39).
A)
B)
C)
HANDLES
-BACKREST CUSHION
The following parts are
needed in this step.
(19)
WASHER Ø8 (6 PCS)
(7)
BACKREST TUBE
(1 PC)
(10)
BACKREST CUSHION
(1 PC)
(18)
BOLT M8X20 (6 PCS)
(19)
(18)
(19)
(18)
(19)
(18)
(19)
(18)
(19)
(18)
12
Flip the Backseat Cushion Pad (10) upside down and place the Backrest Tube (7) on
the bottom part of the Backseat and align the screwing holes.
Proceed to install the Washers (19) and Bolts (18) into each of the 6 corresponding
holes. Tighten up using the Allen Wrench.
Now both the Backset Cushion Pad (10) and the Backrest Tube (7) should be
screwed together.
A)
B)
INSTRUCTIONS
