10
3.2.2 Set Up (Vertical Mode)
1. Place the SRL300 onto a flat level surface with the control panel facing upwards.
2. Press the Power button to turn the SRL300 on and allow it to begin its leveling process. The Power indicator
light will be shown indicating that the unit is on and operating.
3. Once the SRL300 has completed its self-leveling process the laser will begin to rotate. Please note that the
leveling time can vary based on the angle that the laser is positioned from previous use and any disturbances that
the unit may be sustaining.
4. If the SRL300 is outside of its leveling range the laser beam will flash continuously indicating that it is unable
to level.
