10
Receiver with magnets
Receiver with clamps
SET UP
Connection via clamps
• By default, the receiver comes with clamps
attached.
• Use the clamps to attach the receiver directly to
the machine mast (diameter 40-50mm).
Connection via magnets
• To attach the receiver to a metal surface on the
machinery, replace the clamps with the included
magnets.
• Remove the nuts and washers that secure the
clamps to the mounting pads.
• Screw the magnets onto the mounting pads and
secure tightly with the locking grub screw.
USING YOUR RECEIVER
(continued)
