10
Operation
‣
To turn the unit on press the power button. Self
levelling will commence and the laser will begin to rotate.
‣
If the unit is outside the self levelling range the unit will not
level causing the laser beam to flash continuously.
Speed control
‣
Press the speed control button to cycle through various rotational speeds.
‣
The speed control indicator will flash slowly when speed is slow and fast
when speed is increased.
Scanning mode
‣
To focus the laser beam between two points press the scanning mode
button. Pressing the button multiple times will adjust the angle of the beam.
‣
To cancel scan mode press the scanning mode button several times
to cycle through to full rotation.
Rotation
‣
Whilst the unit is in scanning mode press the clockwise or counter
clockwise button to change the rotation of the laser head.
