You may also overwrite an existing memory channel or select an available memory
channel other than the first one displayed. Once again, select the desired frequency and
then press the Memory Key.
Now press either the Up or Down Key to scroll through the 20 memory channels. If a
memory channel is already storing a frequency, the memory channel number and the
stored frequency will be displayed on the top line of the screen while your selected
frequency remains on the bottom line.
Once the desired memory channel is selected on the top line of the screen, press the
Memory Key and the frequency will be stored. Remember, if a channel was selected that
was already storing a frequency, the old frequency will be erased when your selected
frequency is stored.
You may exit the memory function by pressing the Clear Key any time prior to storing
the frequency (pressing the Memory Key the second time).
Memory Recall
To recall a frequency stored in a memory channel, press the Recall Key. The memory
channel number and the corresponding frequency of the first memory channel that is
being used will be displayed. This frequency immediately becomes the active frequency
and is received by the JD-200.
In this example, memory channel 01 is listed first, so we know that no frequency is
currently being stored in memory channel 00.
At this point you may select any stored memory channel by either pressing the Up or
Down Key to scroll through the stored frequencies or by entering the memory channel
number by using the Numeric Keypad. For example, to receive memory channel 08 you
may either:
1.
Press the Recall Key followed by the Up or Down Key to scroll to 08
or
2. Press the Recall Key followed by 0 8.
