17
Memory Clear
To clear or erase a memory channel, select the Aviation band (press the Band key until AIR
appears on the screen), press and hold the Clear key followed by the Memory key. Release the
keys when MEM CLR is displayed on the top line of the screen.
The first memory channel with a stored frequency will be displayed on the bottom line of the
screen. Press the Up or Down key to scroll through the memory channels to select the memory
channel to clear. Once the desired memory channel is displayed, press the Memory Clear key
(also the 0 key on the Numeric Keypad) to clear the selected channel. Additional channels may be
cleared by once again pressing the Up or Down key to make another selection and then pressing
the Memory Clear key.
Press the Clear key at any time to exit the Memory Clear function.
To clear every memory channel, hold down the Clear key while turning on the power. Please
note, there is no way to reverse this process. The screen will display the following to verify all of
the memory channels have been cleared.
Aviation Interrupt
™
This exclusive feature allows you to listen to the ballgame, talk radio or music and never miss an
important aviation transmission.
NOTE: To use this feature you first must have frequencies stored in the Air-Scan
®
V's
memory. Please refer to the Frequency Memory section of this manual for
instructions on how to store frequencies in the Air-Scan V.
ALL \ MEM \ CLR
122.975
1
AIR MEM CLR
