10106 rev. A
15
APPENDIX A: Install Extension Module Frames
STEP 1:
Set first extension upright frame to the
right of the base assembly.
Spacing distances between uprights are
the same as with the base assemblies
(see Part 1, Step 1).
NOTE:
If installing a 6-bike single-sided
or a 12-bike double-sided extension,
ensure this module is the furthest right
extension in the assembly to maintain the
correct vertical stagger of the bike trays.
STEP 2:
Install lower connecting bars to the first
extension and add hardware just as in
base modules, leaving bolts loose until
after cross bars are installed.
Repeat these two steps for any
remaining extension modules as
necessary.
