Turmoil Pro • 1
www.sportwerksRC.com
Setting the Idle RPM
The last setting to be made is the idle rpm. Turning the idle stop screw
clockwise increases the idle speed. Turning the screw counterclockwise will
make the engine idle at a lower rpm. Ideally, the engine should idle just fast
enough to give a reliable idle but not engage the clutch and, of course, never
flame out.
After Run Engine Maintenance
After you’re finished racing for the day, it’s important to empty the fuel tanks
and run the remaining fuel from the engine. Continue to try and start the
engine for several seconds after it will no longer fire to ensure that all fuel
is out of the engine. Put several drops of after run oil in the carburetor and
turn the engine over with the starter for several seconds to coat the internal
engine parts with after run oil.
Clean the air filter regularly using warm soapy water, then allowing it to air
dry before applying air filter oil. Keeping your air filter clean and oiled is vital
to the life of your engine.
