SPORTSTECH FX3 Pro, Manual

Page: 37 / 136

EN
37
ERROR MESSAGES / DISPLAY MESSAGES
Visible
display
Possible cause Proposed solutions
1
The security key has been removed
from the security lock.
1. Check whether the safety switch is in the intended
position.
2. Check whether the safety switch connector is loose
or has fallen off.
3
Lower control error Open circuit in the switch tube
7
Engine anomoly, open circuit in the
engine
1. Check whether the motor wire is loose or has fallen
off.
2. Check / replace the motor.
3. Check / replace the control unit.
8
Transmission error
1. Check whether the communication cables are loose,
dropped or damaged.
2. Check or replace the display panel
3. Check the control and whether the LED light is on
4. Check or replace the controller
9
Overload protection
1. Check for overcurrent.
2. Check whether the moving operating parts of the
device are blocked.
3. Check whether there is a lack of lubricant.
4. Check the device for extreme wear.
5. Check for short circuit in the motor.
6. Check / replace the control unit
10
Protection against power surges
1. Check the voltage of the power supply.
2. Check / replace the control unit.
11
Excess current protection
1. Check for overload.
2. Check whether the moving operating parts of the
device are blocked.
3. Check whether there is a lack of lubricant.
4. Check the device for extreme wear.
5. Check for serious short circuit in the motor.
6. Check / replace the control unit
7. Check / replace IGBT.
12
Short circuit in the motor
1. Check whether there are foreign objects at the out-
put end of the controller that lead to a short circuit.
2. Check / replace the engine.
14
Fault in the sensor 1. Check / replace the sensor assembly of the motor.
15
Low voltage protection
1. Check the voltage on the power supply.
2. Check / replace the controller.