SPORTSTECH F66, User Manual

Page: 44 / 46

19
9.2. Error and self-inspection
Treadmill gives out the following error codes if anything is wrong.
Please contact the professional service people if it happens.
E-01 Undervoltage or problem of inverter
E-02 Overcurrent or the problem of inverter
E-03 Overload, or the problem of inverter
E-04 Overheating or the problem of inverter
E-07 Safety key Off
No need to self-inspect unless special situation.
If necessary, please do it under the instruction of professional technical people or sales
because of the high voltage.
a) Turn on the red power switch and make sure again the safety key is inserted.
(if absent, please insert the key)
b) Press the “start” and ”speed +” key at the same time until the safe key button has been turned on
as the direction on the button. then press the “mode” key (??)
c) after the LED display finished, then press the “mode” key again.
d) the treadmill runs from the lowest speed to highest speed , meanwhile, the incline is also from
lowest to highest. Then treadmill stopped.
NOTE: The whole self-inspection process takes about 5 minutes