- 1
7
-
7.3 Running belt tension adjustment
You may need to adjust the treadmill according to your personal needs.
But after running for a period of time, due to personal weight, the belt
tension may change from default setup. If you realize that the belt is
slippery that may be caused by loose tension, then you need to adjust the
running belt and roller. Please do not adjust too tight that may bring too
much pressure on the motor which would damage the motor, running
belt and roller.
7.4 Running belt far to the right side adjustment
At the operating state, pressing the “+” and “
－
” or the rise
“SHORTCUT”
key can adjust the grade of the treadmill.
①
Main frame is not being placed on a flat surface.
②
Users are not running in the middle of the belt.
③
Forced deviation. After a few minutes no-load rotation, the deviation
can not be automatically restored. If not recovered,you may adjust it
with the 6mm hex key in the Tool Kit, turn it clockwise for 90
degrees. Please see the figure below.
If deviate to the left, then adjust the screw on the left side clockwise or
the screw on the right side anticlockwise.
If deviate to the right, then adjust the screw on the right side clockwise
如果跑带左偏,则顺时针调节左
边螺丝或逆时针调节右边螺丝
如果跑带右偏,则顺时针调节右
边螺丝或逆时针调节左边螺丝
If deviate to the right, then
adjust the screw on the right side
clockwise or the screw on the left
side anticlockwise.
If deviate to the left, then
adjust the screw on the left side
clockwise or the screw on the right
side anticlockwise.
