background image

P.1

Before you start... 

• 

We suggest you spend some time reading this guide before follow-

ing the simple step-by-step assembly instructions.

• 

Do not discard any of the packaging until you have checked that 

you have  all parts and fittings listed. When discarding packaging 
take care and consideration for others and the environment.

• 

When assembling this product be aware of the safety of yourself 

and others.

• 

Because of the size of this product we suggest that you assemble 

it in the area intended for use.

• 

Some of the assembly will be easier with two people. Seek assis-

tance when lifting large or heavy items.

• 

Assemble this product on a clean, flat and level surface e.g. the 

cardboard packaging.

• 

Keep any tools provided or spare fittings for future use. Only use 

the tools specified.

• 

Assemble all parts loosely, by hand, before tightening any bolts or 

fixings.

PLEASE CALL 

BEFORE STARTING ASSEMBLY, PLEASE CHECK ALL PARTS ARE 
INCLUDED. IF ANY PARTS ARE MISSING,                                

(+44) 0330 0904 420,

EMAIL support@sportspowerfit4kids.com, 
OR VISIT www.sportspowerfit4kids.com

Summary of Contents for SW-076C
















Reviews: