SPORTSPOWER SL-019, User And Assembly Manual

Page: 9 / 10

TOP TIPS BEFORE YOU START
1.Please check that all parts are present before you start the
assembly of your unit, as once assembled, the unit is exempt
from our home approval policy.
2.For ease and speed of assembly,we recommend that before
you commmence each step of assembly, you should identify
all the parts required for that step.
and people(as indicated on page 1) to assemble your product
safely.
4.During assembly please take care not to over -tighten any
5.Please retain these instructions for future reference .
WARNINGS
• This slide is for domestic outdoor use only.
• Warning! Choking hazard - This item is not suitable for children
under 3 years due to small parts.
• This slide is intended for children 3-6 years and not exceeding
25 KG(55 lbs) in weight.
• Slide is to be used by only one child at a time.
• For use under adult supervision.
• Do not orientate the slide towerds the sun, this may lead to a
child becoming dizzy/disorientated through extended use.
• Do not allow children to climb on the side bars of the slide
as this could lead to injury.
or head first, as this may lead to injury.
• This slide is designed for a child to slide down in a seated
upright position. Do not encourage children to go down lying
• Do not allow children to wander in front of the slide chute
during use as this may result in injury.
• Packaging materials are not toys. Please remove all packaging
and packing materials before letting children use this slide.
Regularly check this slide for signs of damage or wear. If
any damage is visible do not use until this has been
Maintenance must be carried out by a responsible
adult.
Check all nuts and bolts twice monthly during the
usage season for tightness and tighten as required. It is
particularly important that the procedure be followed
at the beginning of each season.
Never use pliers to tighten up screws - these can cause
damage to paintwork increasing a risk of rust damage.
Tighten all nuts and bolts securely. Replace as needed.
If not checked regularly, bolts can be loose or missed
and components can become detached causing injury.
Check the slide at the beginning of the usage season
and monthly thereafter for evidence of
damage/deterioration. Immediately remove and
replace any items that appear weak or broken.
Check all covers designed for bolts and sharp edges
regularly to be certain they are present and in good
condition. Replace as needed. It is particularly
use in each season.
Inspect metal parts and hardware for proper closure
and for signs of wear, deterioration and rust damage.
Replace as needed.
Lubricate all metal and moving parts regularly.
Remove plastic slide section and store indoors during
periods of inclement weather and when temperature
drops below 32 degrees Fahrenheit/0 degrees Celsius.
It is important to check and maintain the main parts at
regular intervals. If these checks are not carried out, the
slide could overturn or pose an injury hazard.
ASSEMBLY
Adult assembly required. Warning! Choking hazard - This item is
not suitable for children under 3 years due to small parts. Care
should be taken to ensure small children do not have access to
parts when assembling. Please follow instruction for assembly
given and keep for future reference. Failure to assemble and
maintain this item as instructed may result in injury.
Once assembly is complete , carefully check the slide before
Please keep this assembly information and assembly
instructions for future use.
It is recommended to leave all fittings finger tight until
assembly is complete, for ease of construction. Once you have
finished the assembly of the equipment, go back over all of the
nuts and bolts and properly tighten all of them before using the
equipment.
The slide is to be situated at least with a 2m clearance away
from fences, walls, out buildings, over hanging branches,
laundry lines etc.
Do not use on
concrete, asphalt or other hard surfaces. If the slide is set up on
grounds with sandy or soft soil conditions, it must be anchored(not
included). You should consult a local contractor about the best
way to secure the product in your location.
P.8