background image

● Carefully read and understand all of the instructions and safety warnings in this manual before 

assembling and using this product. It is the responsibility of the owner of this product to ensure that all 

users of this product are fully informed on the proper safe use and the inherent risks of playing on this 

product. Failure to do so can result in serious injury or death.

● This product is for household and family domestic use only - It is not for use in schools, playgrounds, 

rental or commercial use.

● Always consult your physician before performing any kind of physical activity. 

● Always use the product in a well-lit area. Do not use without lighting during dawn, dusk or in complete 

darkness! 

● The product must be placed on a surface that is COMPLETELY FLAT AND LEVEL. If the ground is 

uneven, this could cause movement in the product that could cause product damage and/or serious 

injury.

● DO NOT position this product on a hard surface such as concrete, tarmac or paving. Suitable surfaces 

are grass, sand or a play area covered with an appropriate depth of play bark material.  

● Maintain clear space on all sides of the product.

● Areas immediately adjacent to all areas of access/dismount of the inflatable device shall have use zones, 

which are free of obstacles and covered with impact attenuating surfacing for a minimum distance of at 

least 2 m.

● Make sure that there are no hazardous objects above, below or near the product. Such objects include 

walls, fences, tree limbs/trunks, electrical power wiring, rocks, sprinkler heads or other recreational 

objects (i.e. swing sets, swimming pools). Children can be seriously injured by colliding with such 

obstacles.

● Adequate overhead clearance is essential. A minimum of 24 ft from ground level is recommended. 

Provide clearance for wires, tree limbs, and other possible hazards.The product must be stored away or 

disassembled completely during severe windy conditions.  

● The product must be used with the anchors provided and installed properly.

● Make sure anchors are completely inserted into the ground to reduce tipping hazards.

● Do not use the product while holding or wearing any type of sharp or pointed objects such as jewelry, 

watches, rings, eyewear and necklaces. 

● Do not wear loose fitting clothing that may catch or snag during play.

● No shoes or glasses are to be worn on the inflatable device.

● Always tie back long hair so that it does not block user’s vision or get snagged during use.

● Restrict away consumption of food, drink and gum

● Do not attach items to the inflatable device that are not specifically designed for use with the inflatable 

device, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they have 

the potential to cause a strangulation hazard.

● Do not allow pets in or around the product.

● Do not jump on the product with any play objects, including but not limited to, skateboard, roller blades or 

any other equipment. DO NOT hold any foreign objects not authorized by the manufacturer in your hand 

and DO NOT place any objects on the product while anyone is jumping on it. Please be aware of your 

surroundings to ensure there are no objects that could cause harm.

● Always keep hands and feet inside product during use.

● Children MUST NEVER be left unattended on the product at any time.

● Do not attempt to climb over or jump off the product.

● Only one child should be on the platform at a time.

● Only one child should slide down the slide at a time.

Important

 – Please read these instructions fully before assembly or use.

Slide Safety Information

3

Summary of Contents for INF-1440-S
















Reviews: