SPORTSPOWER Bell Peak MSC-5091 Assembly, Installation, Care, Maintenance And User Instructions Download Page 1

Page: 1 / 34

Bell Peak Metal Play Set

Assembly, Installation, Care, Maintenance and User Instructions

Model # MSC-5091

FOR RESIDENTIAL USE ONLY

WARNING

⚫

This product is designed to be used by up to 3 children between the ages 3 to 8.

⚫

Maximum weight of each user is 55lbs. Combined weight of all users must not exceed 165lbs.

⚫

Constant adult supervision is required.

⚫

Carefully read this entire instruction manual before you start to assemble or use this play set.

⚫

You must follow all instructions and warnings while using this equipment.

⚫

Do not use this product on hard packed soil, concrete, or any kind of hard surface.

⚫

Assembly requires at least three adults.

Save this instruction manual for future reference

For Customer Service, please call 1-866-370-2131 or visit

www.sportspowerltd.net

Monday

– Friday 9:00 AM – 5:00 PM Eastern Time

Sportspower Ltd - Level 20, Parkview Centre 7 Lau Li Street, Causeway Bay, Hong Kong

Summary of Contents for Bell Peak MSC-5091



































Search results

Summary of Contents for Bell Peak MSC-5091

Reviews:

Related manuals for Bell Peak MSC-5091

Brands by name

Popular brands

SPORTSPOWER Bell Peak MSC-5091, Assembly, Installation, Care, Maintenance And User Instructions

Search results

Summary of Contents for Bell Peak MSC-5091

Reviews:

Related manuals for Bell Peak MSC-5091

Brands by name

Popular brands