October 8, 2010
1
301-146 10’ MGR
EQUIPMENT MAINTENANCE
Operational
!
Grease Merry Go Round Weekly
or daily in an environment that
has sand or other small damaging
materials.
Hardware
!
Inspect for loose or missing
hardware. Tighten all loose
hardware and replace all missing
hardware. Block off access to
equipment if necessary.
Welds
!
Inspect all welds for cracks. If a
crack is found block access to the
playground and contact your
distributor for replacement parts
immediately.
Finish
!
Inspect all metal components for
coating damage. If powder coating
needs to be repaired sand surface and
mask off area. Coat with primer and
once the primer has dried paint with
color matching touch up paint.
Contact distributor of color matching
paint. Contact Distributor for
Thermoplastic repair kit.
Governor
!
Inspect Governor weekly when
greasing unit. Ensure that all pieces
are installed and secure
!
Ensure rubber wheel is in contact with
the sleeve. If not, tighten by first
backing off jam nut, tighten
adjustment bolt until wheel is in
position and then tighten the jam nut.
Replacement Parts
!
Reference the parts list on page 2 of
the instruction set for this component
to identify the part/s correctly.
!
Contact your distributor to order parts.
Footings
!
Inspect all footings to ensure
equipment is secure. You must block
access to prevent access until repair is
made.
Surfacing -
Refer to the surfacing maintenance
sheet provided by your surfacing supplier.