LS5T 5 Ton Log Splitter
4
IMPORTANT SAFE OPERATION PRACTICES
10. Leaks can be detected by passing cardboard or wood, while wearing protective gloves and safety
glasses, over the suspected area. Look for discoloration of cardboard or wood.
11. If injured by escaping fluid, see a doctor immediately. Serious infection or reaction can develop if proper
medical treatment is not administered immediately.
12. Keep the operator zone and adjacent area clear for safe, secure footing.
13. This machine should be used for splitting wood only, do not use it for any other purpose.
14. Following the instructions in the manual(s) provided with any attachment(s) for this machine.
Preparation
1. Always wear safety shoes or heavy boots.
2. Always wear safety glasses or safety goggles when operating this machine.
3. Never wear jewelry or loose clothing that might become entangled in moving or rotating parts of the
machine.
4. Make sure machine is on a level surface before operating.
5. Always block wheels to prevent unintended movement, and lock beam in either the horizontal or vertical
position.
6. Logs should be cut with square ends prior to splitting.
7. Use log splitter in daylight or under good artificial light.
Operation
1. Never leave this machine unattended with the engine running.
2. Do not operate machine while under the influence of alcohol, drugs, or medication.
3. Never allow anyone to operate this machine without proper instruction.
4. Always operate this machine with all safety equipment in place and working. Make sure all controls are
properly adjusted for safe operation.
5. When loading a log, always place your hands on the sides of the log, not on the ends, and never sue your
foot to help stabilize a log. Failure to do so, ma result in crushed or amputated fingers, toes, hand, or foot.
6. Use only your hand to operate the controls.
7. Never attempt to split more than one log at a time unless the ram has fully extended and a second log is
needed to complete the separation of the first log.
8. For logs which are not cut square, the least square end and the longest portion of the log should be
placed toward the beam and wedge, and the square end placed toward the end plate.
9. Always keep fingers away from any cracks that open in the log while splitting. They can quickly close and
pinch or amputate your fingers.
