5
❑
Kwik Bond Thin C/A # 887500
❑
Kwik Bond Thick C/A # 887510
❑
Kwik Bond 5 Minute Epoxy # 887560
❑
Kwik Bond 30 Minute Epoxy # 887565
❑
Kwik Bond C/A Debonder # 887545
❑
Pacer Formula 560 Canopy Glue # 339176
❑
Pacer Z-42 Blue Threadlocker # 339162
❑
Lightweight Oil or Vaseline
®
❑
# 1 & # 2 Phillips Head Screwdrivers
❑
1.5mm & 2.5mm Hex Wrenches
❑
Adjustable Open-End Wrench
❑
Wire Cutters
❑
Needle Nose Pliers
❑
Excel Modeling Knife # 692801
❑
Scissors
❑
Electric Drill
❑
Assorted Drill Bits
❑
Dubro T-Pins # 567685
❑
Ernst Airplane Stand # 223977
❑
Rotary Tool w/Cutting Disc & Sanding Drum
❑
Ruler
❑
Pencil
❑
Builder's Triangle
❑
220 Grit Sandpaper w/Sanding Block
❑
Waxed Paper
❑
Masking Tape
❑
Paper Towels
❑
Rubbing Alcohol
❑
NHP Epoxy Mixing Sticks # 864204
❑
NHP Epoxy Mixing Cups # 864205
SECTION 2: TOOLS AND SUPPLIES REQUIRED
The tools and supplies listed below will be necessary to finish the assembly of your F-20 Tigershark 40 ARF. We suggest
having these items on hand before beginning assembly.
We have organized the parts as they come out of the box for easier identification during assembly. Before you begin
assembly, group the parts as we list them below. This will ensure that you have all of the parts before you begin assembly
and it will also help you become familiar with each part.
Global Services
18480 Bandilier Circle
Fountain Valley CA 92708
Phone: (714) 963-0329 Fax: (714) 964-6236 Email: [email protected]
On the Web
http://globalservices.globalhobby.com
If you find any parts missing or damaged, please contact us at:
SECTION 3: KIT CONTENTS
AIRFRAME ASSEMBLIES
❑
(1) Fuselage w/Hatch Covers
❑
(1) Right Wing Panel w/Aileron
❑
(1) Left Wing Panel w/Aileron
❑
(1) Horizontal Stabilizer w/Elevator Halves
❑
(1) Vertical Stabilizer w/Rudder
❑
(1) Prebent Steel Nose Gear Strut
❑
(1) Nose Gear Wheel
❑
(1) Nylon Steering Arm
❑
(2) Nylon Spacers
❑
(2) Wheel Collars
❑
(3) M3 x 5mm Machine Screws
❑
(1) 29" Pushrod Wire w/Z-Bend
❑
(1) Adjustable Servo Connector Assembly
NOSE GEAR ASSEMBLY
THROTTLE CONTROL SYSTEM
❑
(1) 34" Pushrod Wire w/Z-Bend
❑
(1) Adjustable Servo Connector Assembly
Continued On Next Page
☛
☛
☛
☛
☛
