6
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” or
“nuts” is used where washers and other hardware may be involved.
STEP 1
Install the Weight Stack Covers
(a). Attach both front and back weight stack covers (A2)(A3) onto the main
frame (A1). (Note: before the attaching the front weight stack cover (A2),
make sure the inside hanger is hooked to the frame before securing it to the
main frame.)
(b). Attach the oval foot covers (A4)(A5) onto the main frame (A1) legs. Align
the ends before use push revits (10) to secure the foot covers together.
Note: While installing the oval foot covers, if the holes don’t match up, please
change the direction of the covers. The cutout should face the inner side of
foot tube.
Summary of Contents for S931
Page 17: ...16...
