12
STEP 7
Belt Tension Adjustment Instructions
1. After the installation and the final positioning of the machine, make the
appropriate adjustments to ensure that the machine is working.
2. If the belt is too tight or too loose, first loosen nut A as shown then adjust
nut B. If the belt length is too long, adjust downward; if the belt length is too
short, adjust upward. Adjust the belt to the proper position, then tighten nut
A to secure the belt length.
Note: After adjusting the belt, the gap between nut A and B must be within
35mm (1.4”).
3. After the adjustment, then the machine should be tested to determine the
functionality of the machine.
Summary of Contents for S921 Mid Row
Page 20: ...19...
