SportsArt Fitness S919 Owner'S Manual Download Page 4

3

2. SAFETY PRECAUTIONS 

This product was designed and built for optimum safety. However certain 

precautions apply during the use of this product. Please note the following safety 

precautions:

• 

Please read the entire manual before assembly and operation. Make 

sure the product is installed and operated as instructed in this manual.

• 

Assemble and operate the product on a solid, level surface. Do not use 

outdoors or near water, including pools and saunas.

• 

Check the product before every use. Make sure all parts are assembled, 

and all fasteners are tightened. Do not use the product if it is disassembled 

in any way.

• 

Wear proper workout clothing. Do not wear loose clothing. Do not wear 

shoes with leather soles or high heels. Tie all long hair back. Do not go 

barefoot on this product.

• 

Keep away from moving parts. Moving parts may or may not stop 

immediately if an object becomes caught or impedes normal motion.

• 

Use this product only for its intended purpose as described in this manual.

• 

Be careful when mounting and dismounting the unit.

• 

Never operate this product if it has been damaged in any way. If it is 

not working properly, or has been dropped or damaged, contact a service 

technician for repairs.

•  Do  not  use  accessories  that  are  not  specifically  recommended  by  the 

manufacturer. Such parts might cause injuries or cause the unit to fail.

• 

This product is not intended for use by persons (including children) with 

reduced physical, sensory, or mental capabilities, or by people who are 

otherwise deficient in product knowledge or experience. If such people use 

this product, they should be given training and be supervised at all times by 

someone responsible for their safety. 

• 

Children should be supervised to ensure that they do not play on or near 

the product. 

• 

The  user weight limit for this product is 227 kg, 500 lb. 

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR 

WORKOUT and consult your physician immediately. Work within your 

recommended exercise level. DO NOT work to exhaustion. Before beginning 

any exercise program, you should consult with your doctor. It is recommended that 

you undergo a complete physical examination.

*NOTE: Regarding the decaled resistance on the unit weight stack, the 

actual weight being lifted is configured at a ratio of 3.3:1. Example: If the 

stack fork is engaged at 60KG (132LB) at the weight stack, the actual pulling 

weight is 20KG (44LB).

Summary of Contents for S919






















Reviews: