45
TV
Antenna
Power
Source
DTV
Ch+
Ch-
Vol+
Vol-
Menu
When you have purchased and installed the DTV option but cannot activate DTV
functions via the Source key, please use the following procedure to activate these
functions.
1. Press the Source key to select the CATV mode.
2. Press the MENU key to enter the main OSD menu.
3. Press the CH- key to select the System Setting function.
4. Press the MENU (OK) key to enter the secondary System Setting window.
5. Press the CH- key to select DTV System.
6. Press the MENU (OK) key to enter the DTV System setting function.
7. Press the CH+/- key to select DTV mode (ATSC/DVBT).
8. Continually press the VOL- key to exit the OSD menu.
Connect the digital TV signal cable (or wireless antenna) as shown in Figure 3. Press
the Source key to select the DTV mode until
DTV
appears in the left upper corner
as shown in Figure 4.
For DTV usage, please refer to the integrated TV digital TV option manual.
「
」
3.6.4
OSD Menu, Other Functions - DTV
Summary of Contents for C572R
