SNAP ATTACK™ FOOTBALL MACHINE
Sports Attack, LLC.
|
800.717.4251
|
www.sportsattack.com
2
Safety Instructions
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
Use a 115 volt single phase 3-wire grounded power source . Up to 200 ft . from power
source, use a minimum #14/3 grounded 3-wire extension cord . Over 200 ft . from
power source, consult a licensed electrician for required power cord size .
OPERATING SAFETY
CAUTION: Never reach down near moving throwing wheels for any reason! If it is
necessary to reach into the throwing wheels, ALWAYS:
1 . Turn speed dial to “0” .
2 . Turn the power switch “OFF” .
3 . Unplug Snap Attack™ from power source .
4 . Wait until the throwing wheels have come to a complete stop before reaching
hands or fingers anywhere near the throwing wheels.
CAUTION: Carefully check Snap Attack for completeness and condition before
connecting to electrical power:
Carefully check the throwing wheels frequently for cleanliness, chips and cracks . Do
not use the machine if the throwing wheels are damaged, or if chips or cracks appear
in the wheels. (For damage within warranty period, see Warranty Statement, page 1.)
ALWAYS set the speed control to “0” before connecting the machine to power .
Check that the speed control is at “0” before turning the throwing wheels “ON” .
Do not allow anyone to walk in front of the Snap Attack Football Machine if it is
connected to electrical power .
CAUTION: DO NOT plug in or energize this equipment until all assembly instructions
and operation instructions are read and followed .
BALL SELECTION
Balls must be official size and consistent in type to produce repeatability.
Never use wet or damp balls! Ball air pressure must be between 10-12 lbs .
WARNING
PERSONAL
INJURY HAZARD
Carefully read all instructions in
this manual, and all labels and
warnings on Snap Attack
before using this machine .
Use machine only under adult
supervision . Failure to operate
Snap Attack as described in
this manual can result in severe
personal injury or death .
ELECTRICAL
SHOCK HAZARD
The Snap Attack must be
connected to a properly
grounded electrical receptacle .
Do not operate on wet ground .
CAUTION
PERSONAL
INJURY HAZARD
Keep hands away from throwing
wheels anytime the machine is
connected to a power source .
Carefully check the Snap
Attack for completeness and
condition before connecting
to electrical power .
EQUIPMENT
ELECTRICAL DAMAGE
Keep hands away from throwing
wheels anytime the machine is
connected to a power source .
Carefully check the Snap
Attack for completeness and
condition before connecting
to electrical power .
BALL REQUIREMENT
Do NOT use synthetic leather
footballs . We recommend full
grain leather .
Air Pressure & Distance
Distance
Air Pressure
70-90 yds.
9-11 lbs.
55-70 yds.
7-8 lbs.
40-55 yds.
5-6 lbs.
Slippage occurs at higher wheel speeds with lower air pressure .
We recommend higher air pressure to prevent slippage .