SKILL ATTACK
™
VOLLEYBALLBALL MACHINE
SPORTS ATTACK, LLC.
•
800-717-4251
•
sportsattack.com
5
A
F
B
G
E
ASSEMBLY INSTRUCTIONS
Tools required: Wrench for casters (provided. See Figure 2).
STEP ONE
Lay out all parts and check them against parts list. Call customer service immediately if any
parts are missing. Please have applicable part numbers as shown on parts list (See page 10).
STEP TWO
Screw on casters to the end of legs. Tighten with the wrench provided (See Figure 2).
STEP THREE
Insert the three legs into tripod sockets and tighten handles as shown in A.
STEP FOUR
Loosen handle E and insert yoke shaft F into tube at G. Then tighten handle E snuggly.
STEP FIVE
Attach throwing head to yoke plate by loosening throwing head thumb screw and fitting
base bolt through bottom plate hole in throwing head and secure. Tighten throwing head
thumbscrew into base bolt B.
Assembly is now complete and your Skill Attack Volleyball Machine is ready for use.
See instructions in the manual and on the decals on the machine for operating procedures
and options.
Safety Instructions
Figure 1
Assembling the tripod base.
Figure 2
Wrench provided (in the nut and bolt kit
with casters) to securely tighten casters.
LOCKING CASTER (QTY 3)
Tighten casters securely
using the wrench provided.
See Figure 2.
To order additional parts,
please call:
Sports Attack Customer
Service Department
Ph
800.717.4251
Fx
775.345.2883