Sports Attack JUNIOR HACK ATTACK Instruction Manual Download Page 10

JUNIOR HACK ATTACK

 SOFTBALL PITCHING MACHINE

SPORTS ATTACK, LLC.  

  800-717-4251  

  sportsattack.com

8

Softball Fungo (Fielding Pr

actice)

SOFTBALL FUNGO 

(FIELDING PRACTICE)

 

 

THROWING GROUNDERS, FLY BALLS, LINE DRIVES AND 

POP-UPS

  1.  Roll Junior Hack Attack to home plate and face toward center field. Install legs, tilt it  
 

  into position and connect to electric power (See Baseball Set-up & Preparation on Page 5).

  2.  Turn the elevation control counter-clockwise to release the frame lock. 
 

  See page 5, Photo C.

  3.  Loosen the horizontal swivel lock until the throwing head pivots freely. 
 

  See Photo C.

 

  Store horizontal swivel lock in storage nut (See Photo D).

 

  By using the handle on the end of the ball chute, you can easily pivot Junior Hack Attack  

 

  to aim at any point on the field.

 

  You can simulate various line drives (slicing, fading, sinking, rising, etc.) by adjusting the  

 

  spin. Refer to Figure 5 on page 7.

 

  See Figure 6 below: 

 

  For pop-ups, push the handle down. Using the opposite hand, situate ball on ball chute so  

 

  that the ball rolls down the chute and through the throwing wheels.

  4.  When defensive work is completed, position the “through hole” directly over the  
 

  undercarriage nut. Screw in the horizontal swivel lock through the “through hole” and  

 

  into the undercarriage nut and tighten securely. 

Figure 6 

Feeding the ball for pop-ups.

WARNING 

HAZARD FROM  

HIGH-SPEED PROJEC-

TILES

Being struck by a pitched ball 
can cause serious injury or death. 
Make sure that no one steps in 
front of Junior Hack Attack while 
it is connected to electric power.

Clear all hitters away from home 
plate, the batter’s box and the 
backstop area before connecting  
machine to electric power.

CAUTION 

PERSONAL INJURY 

HAZARD

Never reach up chute to push ball 
into the throwing wheels. Be sure 
to keep hands and fingers well 
away from the throwing wheels.

Be careful to keep all persons 
away from front of Junior Hack 
Attack any time it is connected to 
electrical power.

Photo C 

Horizontal swivel lock.

Photo D 

Store horizontal swivel lock in storage nut.

Storage Nut

Horizontal 

Swivel Lock

Through Hole

Undercarriage 

Nut

Summary of Contents for JUNIOR HACK ATTACK





















Reviews: