10. SILENT ENTRY MODE
9. LOCKOUT MODE/ TAMPER PROTECTION
11. CLEARING ALL PROGRAMMED FINGERPRINTS
10
HOLD DOWN
THE RESET BUTTON
x
2
x
2
GREEN
LIGHT
NOTE:
If 100 max fingerprints have already been programmed
indicator ring will flash 5 times
and beep 5 times. We recommend clearing all programmed fingerprints and starting the
programming process over.
Hold Reset button. Initially, the
indicator ring will flash green and
beep once. Continue holding reset
button for 5 seconds, the indicator
ring will flash green two times
and beep two times.
To initiate silent entry mode, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on, but will not beep,
indicating you are now in silent entry mode.
You will not hear any sounds for any functions
while the vault is in silent entry mode.
To turn the sound back on, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on and will beep once
indicating you are no longer in silent entry mode.
1. Three consecutive incorrect code entries will
put the vault in “Basic Lockout” mode. Scanner
is deactivated for 30 seconds.
2. After “Basic Lockout” mode has ended, another
three consecutive incorrect code entries will
result in “Severe Lockout” mode. Scanner is
deactivated for 5-minutes.