4.
Plug E-lock cable into the
back of the E-lock. The cable
connector will only fit one
way into the connector in
the lock face.
2. The e-lock requires 1x9V
alkaline battery. Locate the
battery compartment on
the back of the lock face.
Insert the battery in the
proper orientation. Keypad
will beep when batteries
are successfully installed.
WARNING: The batteries must be
inserted with the correct polarity.
Exhausted batteries must be removed
from the product and discarded safely.
Do not mix old and new batteries. Do not
mix alkaline or standard (carbon – zinc)
batteries. Do not use rechargeable
(nickel – cadmium) batteries.
1. Remove lock face from box
located inside of safe.
3.
10. E-LOCK INSTALLATION
9
1 2 3 4
5
8
7
6
#
0
9
*
Align the lock face to the
backer plate, with the lock
face slightly rotated to the
left. Turn clockwise until
the E-lock clicks into place.
Locate the two remaining
handle spokes inside of the
safe. Insert each individual
spoke into a threaded
opening and turn clockwise
to install.
St
ep 3
St
ep 2
St
ep 1
BACK OF LOCK FACE
FRONT OF LOCK FACE
9V BATTERY
St
ep 4
